Radiator Fan Wiring and Finishing
Connected radiator fan harness.
Plumbing the Cooling System
This may be the easiest part of the build and was straight forward and simple. I did do a few additional things as part of the installation. First, so that you do not see aluminum when looking to the radiator air inlet, I decided to paint the front of the condenser black. I used Eastwood's radiator paint. It is designed specifically for radiators. Still I only applied enough to cover the aluminum on just one side of the condenser. I then used a red scuff pad to scuff the drivers side mount and then cleaned it with alcohol. I then secured the mount with double side tape. I drilled three holes per tab and left it cleco'd because I will be reenforcing the front of the lower tray.